5x10 AlMgSiCu 6061 T6 Aluminum Sheet
Product Description
Featurer of 6061 aluminum sheet
1. High quality material: Our 6061 T6 aluminum plate is made of high-quality aluminum alloy, ensuring its durability.
2. Corrosion resistance: This 6061 aluminum sheet has excellent corrosion resistance and is an ideal choice for ships, automobiles, and aerospace applications.
3. Lightweight and sturdy: 6061 T6 aluminum sheet is lightweight but sturdy, making it an excellent choice for applications involving weight in aircraft and automotive manufacturing.
4. Good weldability: The 6061 aluminum sheet has good weldability, is easy to manufacture, and is very suitable for use in a wide range of welding applications.
5. Multi functional applications: Our 6061 T6 aluminum sheet can be used for various applications such as flooring, decoration, and decorative purposes, making it a versatile choice to meet all your aluminum sheet needs.
The specification of 6061 aluminum sheet:
Name: 6000 series Aluminum Sheet |
||||||||||||
Alloy: 6061, 6082, 6063 etc. |
||||||||||||
Temper: O, H112, T4, T6, T651 etc. |
||||||||||||
Thickness: 6-200mm |
||||||||||||
Width: Up to 1500mm |
||||||||||||
Surface treatment: mill finished, Print marks |
||||||||||||
Feature |
Machinability: In the harder T 4 and T6 tempers it is good. It is notably less easy to machine in the annealed temper. |
|||||||||||
Forming: Easily cold worked and formed in the annealed condition. Stamping, bending, spinning, deep drawing are all readily accomplished using standard methods. |
||||||||||||
Welding: It has very good welding characteristics and may be welded by all of the common welding techniques. |
||||||||||||
Heat Treatment: Solution heat treat at 990 F for adequate time to allow for thorough heating and then water quench. Precipitation hardening is done at 320 F for 18 hours and air cool, followed by 350 F for 8 hours and air cooling. |
||||||||||||
Forging: It is capable of being hot forged at temperatures in the range of 900 F to 750 F. |
||||||||||||
Hot Working: Hot working may be done in the temperature range of 700 F to 500 F. |
||||||||||||
Cold Working: Cold working in the O temper condition is readily performed. The alloy is notably less easy to cold form in the T 4 and T 6 tempers. |
||||||||||||
Annealing: Annealing should be done at 775 F for 2 to 3 hours followed by controlled cooling at 50 f per hour down to 500 F, then air cool. |
||||||||||||
Aging: The aging precipitation heat treatment is done at 350 F for 8 hours followed by air cooling. This produces the T6 temper. |
||||||||||||
Application |
Commonly used in the manufacture of heavy-duty structures requiring good corrosion resistance, truck and marine components, railroad cars, furniture, tank fittings, general structural and high pressure applications, wire products, pipelines, various toolings etc. |
|||||||||||
Alloy |
Chemical Component %≤ |
|||||||||||
Si |
Fe |
Cu |
Mn |
Mg |
Cr |
Ni |
Zn |
Ti |
others |
Al |
||
single |
total |
|||||||||||
6061 |
0.4- 0.8 |
0.7 |
0.15-0.4 |
0.15 |
0.8- 1.2 |
0.04-0.35 |
\ |
0.25 |
0.15 |
0.05 |
0.15 |
remainder |
6082 |
0.7- 1.3 |
0.5 |
0.1 |
0.4- 1.0 |
0.6- 1.2 |
0.25 |
\ |
0.2 |
0.1 |
0.05 |
0.15 |
remainder |
6063 |
0.2- 0.6 |
0.35 |
0.1 |
0.1 |
0.45-0.9 |
0.1 |
\ |
0.1 |
0.1 |
0.05 |
0.15 |
remainder |
Contact |
Ms. Susan Zhang |
Email:aluminum@edobo.net |
Tel: 0086-13031603973 |