Are you looking for a 1060 aluminum coil tube supplier in China? Contact with Yantai Edobo Aluminum Co.,Ltd, we will start a long-term business cooperation by this chance.
Specifications of 1060 Aluminium coil tubing cooling tube：
Name: 1060 Aluminum Coil Tube
Alloy: 1050, 1060, 1100 etc.
Temper: O, H112 etc.
Thickness: 0.65mm 0.7mm 0.8mm 0.9mm 1mm 1.2mm
Outer Diameter:4 /5 /6 /8 /9.52 /10 /12 /12.7 /15.88 /16 /19.05mm
Inner Diameter:2 /3 /4 /4.7 /6//6.6 /8 /7.52 /8 /8.12 /10 /10.4 /11.1 /14 /14.08 /16.65mm
1000 series Aluminum Coil Tube Quality Data Sheet/Chemistry Composition:
Alloy | Chemical Component %≤ | |||||||||||
Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | others | Al | ||
single | total | |||||||||||
1050 | 0.25 | 0.4 | 0.05 | 0.05 | 0.05 | \ | \ | 0.05 | 0.03 | 0.03 | \ | 99.50 |
1060 | 0.25 | 0.35 | 0.05 | 0.03 | 0.03 | \ | \ | 0.05 | 0.03 | 0.03 | \ | 99.60 |
1100 | 0.95 | 0.05-0.2 | 0.05 | \ | \ | \ | 0.1 | \ | 0.05 | 0.15 | 99.00 | |
1060 series Aluminum Mechanical Properties Standard：
| Temper | Anti –tensile strength N/m㎡ | Elongation rate（%） | Plastic tensile strength | ||
|---|---|---|---|---|---|
| 1060-O | 60-100Mpa | 18 | 15 | ||
| 1060-H112 | 60-75Mpa | 10 | - | ||
What is the difference between the O state and the H state of the 1060 aluminum ：
The main difference between the O state and H state of 1060 aluminum lies in their manufacturing process, physical properties, and range of use.
Firstly, from the perspective of manufacturing process, the 1060 aluminum plate in O state is formed by crystallization after complete annealing, while the H state (taking H24 as an example) is a state that has undergone incomplete annealing after work hardening. This means that the O-state aluminum plate removes stress during annealing, giving it lower strength and higher plasticity, while the H-state increases hardness through work hardening but retains some plasticity.
In terms of physical properties, O-state 1060 aluminum plate is relatively soft, easy to bend and deep draw, mainly used in industries that require high plasticity such as decoration and packaging. Aluminum plates in H24 state are relatively hard and can be processed through drawing, cutting, bending, and other operations. They are usually used in industries such as curtain walls and mechanical processing, and require high hardness in application scenarios
What are the uses of 1060 aluminum coil tube？
Aluminum coils are suitable for various air conditioners, refrigerators, freezer refrigeration pipes, floor heating heating pipes,home appliance repairs, heaters, high temperature furnace pipes, water heaters, hot water heaters, special aluminum pipes, solar energy, industrial hardware stamping, etc...
How to package 1060 aluminum tube coil air conditioner？
1. Wooden pallet packaging
Aluminum alloy coils are neatly stacked on wooden pallets and tightly wrapped with plastic film to prevent collisions or friction during transportation, as well as to prevent corrosion of aluminum alloy pipes due to moisture and other factors.
2. Carton packaging
Aluminum alloy coils are neatly stacked in cardboard boxes and sealed with tape to prevent compression or collision during transportation. In addition, moisture-proof cardboard or foam board and other materials can be added outside the carton to ensure that it will not be damped during transportation.
1.Can 1060 aluminum coil tube replace copper pipe in car air conditioning?
Aluminum tubes for automotive air conditioning can replace copper tubes. Aluminum tubes have significant advantages in automotive air conditioning systems, especially in terms of lightweight design and cost-effectiveness.
The application of aluminum tubes in automotive air conditioning systems mainly has the following advantages:
Lightweight design: Aluminum has a much lower density than copper, and using aluminum tubes can significantly reduce the overall weight of the car, thereby improving fuel economy and reducing carbon emissions.
Cost effectiveness: Aluminum tubes have lower raw material costs and a more economical manufacturing process, which helps to reduce automotive manufacturing costs.
2.Can Aluminum Instead of Copper?
The question of whether aluminum tubes and copper tubes can be replaced with each other has always been controversial. Early aluminum tubes were not recommended for use due to their inability to withstand internal pressure, which made them prone to cracking, explosions, and internal leaks. However, the quality and processing technology of aluminum tubes produced now continue to improve, strengthening the thickness of the tube wall, increasing pressure resistance and wear resistance, thus improving reliability and being able to replace copper tubes to a certain extent.
Meanwhile, the price of aluminum tubes is relatively more affordable compared to copper tubes, but the strength and corrosion resistance of aluminum tubes are not as good as copper tubes. Therefore, when selecting materials, they need to be determined based on the usage environment and requirements. If it is in coastal areas, it is recommended to use copper pipes as they are more corrosion-resistant; If it is in inland dry areas, using aluminum tubes is more suitable.