Availability: | |
---|---|
Quantity: | |
7075 T6 Aluminum Slug
Edobo
Are you looking for a 7075 T6 aluminum sheet supplier in China? Contact with Yantai Edobo Aluminum Co.,Ltd, we will start a long-term business cooperation by this chance.
Specifications of 7075 T6 Aluminium Slug:
Aluminium Alloy Number: 7075
Temper: T6 / T651 /T351
Produce to ASTM B209 or GB/T3880-2012, EN485 standard;
Standard size: 4 x 8; 1219 x 2438mm, 1500mm x 3000mm; 1524mm x 3048mm
Surface: mill finish surface, bright, polished surface,
Mainly market: Europe, India, Iran, Pakistan, Thailand, Mexico, USA and so on.
Over 3,000Tons ready stock with standard size 1524 x 3048mm & 1500 x 3000mm.
What is the difference between aluminum plate slitting and flat?
The slitting and flattening of aluminum plates are two different processing steps.
Slitting refers to cutting a larger aluminum plate into smaller pieces according to certain size requirements. This is to meet the needs of customers with different size requirements, as well as to facilitate subsequent processing and use. Cutting can be done using mechanical cutting tools such as shearing machines or cutting machines, according to the size requirements provided by the customer.
Kaiping refers to the processing of aluminum plates by correcting the protruding parts on their surfaces to make them flat. Kaiping operation can be carried out in various ways, including mechanical processing, pressure processing, etc. Usually, a flattening machine or a leveling machine is used for flattening treatment to achieve the required thickness and flatness of the aluminum plate.
So, slitting and flattening are two different processing processes. slitting is cutting large aluminum plates into small pieces, while flattening is correcting the raised parts on the surface of the aluminum plate to make it flat. These two steps are often performed simultaneously in aluminum plate processing to meet the shape and size requirements of customers.
6061 Aluminum Plate Quality Data Sheet/Chemistry Composition:
Alloy | Chemical Component %≤ | |||||||||||
Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Others | Al | ||
Single | Total | |||||||||||
7075 | 0.4 | 0.5 | 1.2-2.0 | 0.3 | 2.1-2.9 | 0.18-0.28 | \ | 5.1-6.1 | 0.2 | 0.05 | 0.15 | remainder |
What is 7000 series aluminum sheet?
The 7000 series (A1 Zn Mg series) aluminum alloy, also known as superhard aluminum, belongs to high-strength aluminum alloys. It has good plasticity in both quenched and annealed states and can be strengthened by heat treatment. It is usually applied under quenching and artificial aging, which can achieve higher strength than general hard aluminum.
However, its plasticity is low, and the alloy has good spot welding performance, poor gas welding, and poor machinability after annealing, such as 7A02. The 7000 series aluminum alloy can be applied to the main load-bearing structural components, such as beams, reinforcement frames, skins, joints, landing gear, etc. on aircraft. 7A09 can be used to manufacture structural components and main load-bearing parts of aircraft skins. 7004 is an A1 Mg cu Zn system, transformed from the Japanese 7003 alloy, with good comprehensive mechanical properties and corrosion resistance.
Mainly used for making profiles and producing bicycle rims. The Beijing Institute of Aeronautical Materials has developed 7A55 alloy, which has high plasticity and a static strength exceeding 700Mpa, making it one of the highest strength grades among the publicly available deformed aluminum alloys.
6061-T6 Aluminum Alloy Plate Mechanical Properties Standard:
Temper | Anti –tensile strength N/m㎡ | Elongation rate(%) | Dimension Control | Hardness | |
---|---|---|---|---|---|
7075 T6 | 525Mpa | 6 | Qualified | 157HB | |
7075 T651 | 540Mpa | 6 | Qualified | 160HB |
What is 7075 T651 aluminum Sheet?
7075-T651 is known as the best product among aluminum alloys. T651 indicates that this alloy has undergone heat treatment and pre stretching processes. T6 and T651 alloys have a tensile strength of 572 MPa and a yield strength of 503 MPa. Meanwhile, 7075 alloy has excellent mechanical properties and anodizing performance. The American ASTM.
Standards Association evaluates 7075 alloy as having Class B mechanical properties due to its ability to produce curled or easily breakable chips and excellent surface treatment.
What are the applications of 7075 aluminum alloy?
When weight is a critical factor but strength cannot be compromised, the 7075 T651 aluminum plate is a widely favored alternative to steel. Alloy 7075 boasts an exceptional strength-to-weight ratio, far superior to that of steel, making it a popular choice across multiple industries. With a strength-to-weight ratio of 196 kN-m/kg, 7075 combines high strength and light weight, ideal for demanding sectors such as aviation, automotive, and firearms manufacturing.
Originally developed in 1936, 7075 was introduced as a solution to enhance aircraft fuel efficiency by reducing weight while maintaining the structural integrity required for complex maneuvers. Although it doesn't offer the same level of corrosion resistance as alloy 6061, its outstanding performance in high-stress environments, thanks to zinc being its primary alloying element, has cemented its role in the aerospace industry.
Beyond aviation, 7075 is also heavily utilized in the automotive industry for similar reasons, offering both durability and weight savings. Its strength has also made it a key material in the firearms industry, with the alloy featured in the construction of weapons like the M16, AR-15, and various handguns.
As a member of the 7000 aluminum series, 7075 is now integral to countless products in a variety of applications where high strength and reduced weight are essential.
1.How to use 7075 aluminum alloy
7075-T651 is a high-strength aluminum alloy commonly used to manufacture components that withstand high stress, such as aerospace parts, bicycle frames, etc. To ensure a flatness of 0.03 threads, precise processing techniques and equipment are required.
The following are possible processing techniques:
Precision cutting: Using high-precision CNC machine tools and rigid cutting tools, adopting a cutting method of small cutting depth, small feed rate, and low cutting speed to reduce the impact of cutting force on the workpiece and ensure flatness.
Grinding processing: High precision surface grinding machines or CNC grinding machines are used, with fine grinding wheels and coolant to control the temperature and pressure during the grinding process, ensuring grinding accuracy and flatness.
Grinding: Using grinding tools and abrasives, the surface roughness is removed through the grinding process to improve flatness.
Polishing: Using polishing cloth, polishing agent and other materials, the micro unevenness of the surface is removed by manual or mechanical polishing to improve flatness.
It should be noted that in order to ensure flatness and accuracy, the material needs to be accurately measured and calibrated before processing. During processing, environmental factors such as temperature and humidity need to be strictly controlled, and precise testing and inspection are required after processing.
Contact us for the latest aluminum prices
Are you looking for a 7075 T6 aluminum sheet supplier in China? Contact with Yantai Edobo Aluminum Co.,Ltd, we will start a long-term business cooperation by this chance.
Specifications of 7075 T6 Aluminium Slug:
Aluminium Alloy Number: 7075
Temper: T6 / T651 /T351
Produce to ASTM B209 or GB/T3880-2012, EN485 standard;
Standard size: 4 x 8; 1219 x 2438mm, 1500mm x 3000mm; 1524mm x 3048mm
Surface: mill finish surface, bright, polished surface,
Mainly market: Europe, India, Iran, Pakistan, Thailand, Mexico, USA and so on.
Over 3,000Tons ready stock with standard size 1524 x 3048mm & 1500 x 3000mm.
What is the difference between aluminum plate slitting and flat?
The slitting and flattening of aluminum plates are two different processing steps.
Slitting refers to cutting a larger aluminum plate into smaller pieces according to certain size requirements. This is to meet the needs of customers with different size requirements, as well as to facilitate subsequent processing and use. Cutting can be done using mechanical cutting tools such as shearing machines or cutting machines, according to the size requirements provided by the customer.
Kaiping refers to the processing of aluminum plates by correcting the protruding parts on their surfaces to make them flat. Kaiping operation can be carried out in various ways, including mechanical processing, pressure processing, etc. Usually, a flattening machine or a leveling machine is used for flattening treatment to achieve the required thickness and flatness of the aluminum plate.
So, slitting and flattening are two different processing processes. slitting is cutting large aluminum plates into small pieces, while flattening is correcting the raised parts on the surface of the aluminum plate to make it flat. These two steps are often performed simultaneously in aluminum plate processing to meet the shape and size requirements of customers.
6061 Aluminum Plate Quality Data Sheet/Chemistry Composition:
Alloy | Chemical Component %≤ | |||||||||||
Si | Fe | Cu | Mn | Mg | Cr | Ni | Zn | Ti | Others | Al | ||
Single | Total | |||||||||||
7075 | 0.4 | 0.5 | 1.2-2.0 | 0.3 | 2.1-2.9 | 0.18-0.28 | \ | 5.1-6.1 | 0.2 | 0.05 | 0.15 | remainder |
What is 7000 series aluminum sheet?
The 7000 series (A1 Zn Mg series) aluminum alloy, also known as superhard aluminum, belongs to high-strength aluminum alloys. It has good plasticity in both quenched and annealed states and can be strengthened by heat treatment. It is usually applied under quenching and artificial aging, which can achieve higher strength than general hard aluminum.
However, its plasticity is low, and the alloy has good spot welding performance, poor gas welding, and poor machinability after annealing, such as 7A02. The 7000 series aluminum alloy can be applied to the main load-bearing structural components, such as beams, reinforcement frames, skins, joints, landing gear, etc. on aircraft. 7A09 can be used to manufacture structural components and main load-bearing parts of aircraft skins. 7004 is an A1 Mg cu Zn system, transformed from the Japanese 7003 alloy, with good comprehensive mechanical properties and corrosion resistance.
Mainly used for making profiles and producing bicycle rims. The Beijing Institute of Aeronautical Materials has developed 7A55 alloy, which has high plasticity and a static strength exceeding 700Mpa, making it one of the highest strength grades among the publicly available deformed aluminum alloys.
6061-T6 Aluminum Alloy Plate Mechanical Properties Standard:
Temper | Anti –tensile strength N/m㎡ | Elongation rate(%) | Dimension Control | Hardness | |
---|---|---|---|---|---|
7075 T6 | 525Mpa | 6 | Qualified | 157HB | |
7075 T651 | 540Mpa | 6 | Qualified | 160HB |
What is 7075 T651 aluminum Sheet?
7075-T651 is known as the best product among aluminum alloys. T651 indicates that this alloy has undergone heat treatment and pre stretching processes. T6 and T651 alloys have a tensile strength of 572 MPa and a yield strength of 503 MPa. Meanwhile, 7075 alloy has excellent mechanical properties and anodizing performance. The American ASTM.
Standards Association evaluates 7075 alloy as having Class B mechanical properties due to its ability to produce curled or easily breakable chips and excellent surface treatment.
What are the applications of 7075 aluminum alloy?
When weight is a critical factor but strength cannot be compromised, the 7075 T651 aluminum plate is a widely favored alternative to steel. Alloy 7075 boasts an exceptional strength-to-weight ratio, far superior to that of steel, making it a popular choice across multiple industries. With a strength-to-weight ratio of 196 kN-m/kg, 7075 combines high strength and light weight, ideal for demanding sectors such as aviation, automotive, and firearms manufacturing.
Originally developed in 1936, 7075 was introduced as a solution to enhance aircraft fuel efficiency by reducing weight while maintaining the structural integrity required for complex maneuvers. Although it doesn't offer the same level of corrosion resistance as alloy 6061, its outstanding performance in high-stress environments, thanks to zinc being its primary alloying element, has cemented its role in the aerospace industry.
Beyond aviation, 7075 is also heavily utilized in the automotive industry for similar reasons, offering both durability and weight savings. Its strength has also made it a key material in the firearms industry, with the alloy featured in the construction of weapons like the M16, AR-15, and various handguns.
As a member of the 7000 aluminum series, 7075 is now integral to countless products in a variety of applications where high strength and reduced weight are essential.
1.How to use 7075 aluminum alloy
7075-T651 is a high-strength aluminum alloy commonly used to manufacture components that withstand high stress, such as aerospace parts, bicycle frames, etc. To ensure a flatness of 0.03 threads, precise processing techniques and equipment are required.
The following are possible processing techniques:
Precision cutting: Using high-precision CNC machine tools and rigid cutting tools, adopting a cutting method of small cutting depth, small feed rate, and low cutting speed to reduce the impact of cutting force on the workpiece and ensure flatness.
Grinding processing: High precision surface grinding machines or CNC grinding machines are used, with fine grinding wheels and coolant to control the temperature and pressure during the grinding process, ensuring grinding accuracy and flatness.
Grinding: Using grinding tools and abrasives, the surface roughness is removed through the grinding process to improve flatness.
Polishing: Using polishing cloth, polishing agent and other materials, the micro unevenness of the surface is removed by manual or mechanical polishing to improve flatness.
It should be noted that in order to ensure flatness and accuracy, the material needs to be accurately measured and calibrated before processing. During processing, environmental factors such as temperature and humidity need to be strictly controlled, and precise testing and inspection are required after processing.
Contact us for the latest aluminum prices
What is 6061-T6 Aluminum Used For? Aluminum is a versatile material used in a variety of industries due to its lightweight and durable properties. Among the different types of aluminum, 6061-T6 aluminum stands out for its exceptional strength and versatility. This article delves into the various ap
Understanding the Differences Between 3003 and 5005 Aluminum Aluminum alloys are widely used in various industries due to their excellent properties, such as lightweight, corrosion resistance, and high strength. Among the numerous aluminum alloys available, 3003 and 5005 aluminum alloys are two of
Aluminum is a versatile material that is used in a wide range of industries, from aerospace to automotive to construction. One of the most popular aluminum alloys is 2024, which is known for its high strength and excellent machinability. Within the 2024 alloy family, two of the most common tempers a
6061-T6 temper: After xrlutian treatment, it is cooled to achieve high strength and no longer subjected to cold processing; 6061-T651 temper: After xrlutian treatment, it is cooled to achieve high strength, and then cold stretched by a stretching machine to eliminate residual internal stress after heat treatment, achieving no deformation after deep processing to ensure the precision of machined products.
The common states of 6061 aluminum plate include O state, T4 state, T6 state, and T651 state. The T651 state alloy is formed by stretching on the basis of T6 state to eliminate internal stress, making it more suitable for processing and forming.The difference between T6 and T651 states of 6061 alumi