1060 aluminum sheet , with an aluminum content of 99.6%, is also called pure aluminum sheet, which belongs to a commonly used series in the aluminum sheet and strip family. Advantages of this series of 1060 aluminum sheet: the most commonly used series, the production process is relatively simple, the technology is relatively mature, and the price has a huge advantage over other high-grade alloy aluminum plates. With good elongation and tensile strength, it can fully meet the conventional processing requirements (stamping, stretching) and high formability.
| Quantity: | |
|---|---|
Thickness: 0.2mm -6mm
Width: 30 mm-2600 mm
Length: as customer required
Temper: O /H12/H14/H16/H18/H26/H22/H24/H26/H28
Chemical Composition of 1060 Aluminium Sheet
Elements | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Others | Al |
Content (max ) | 0.25
| 0.35 | 0.05 | 0.03 | 0.03 | - | 0.05 | 0.03 | 0.15 | Remain |
Mechanical Properties of 1060 Aluminum Sheet
Alloy Temper | Specified | Tensile | Yield | Elongation(%) |
Thickness(in.) | strength(ksi) | strength(ksi) | ||
1060-O(annealed) | 0.006-0.019 | 8.0-14.0 | 2.5 | Min15 |
0.020-0.050 | Min22 | |||
0.051-3.000 | Min25 | |||
1060-H12/1060-H22 | 0.017-0.050 | 11.0-16.0 | 9 | Min6 |
0.051-2.000 | Min12 | |||
1060-H14/1060-H24 | 0.006-0.019 | 12.0-17.0 | 10 | Min1 |
0.020-0.050 | Min5 | |||
0.051-1.000 | Min10 | |||
1060-H16/1060-H26 | 0.006-0.019 | 14.0-19.0 | 11 | Min1 |
0.020-0.050 | Min4 | |||
0.051-0.162 | Min5 | |||
1060-H18/1060-H28 | 0.006-0.019 | Min16.0 | Min12.0 | Min1 |
0.020-0.050 | Min3 | |||
0.051-0.128 | Min4 | |||
1060-H112 | 0.250-0.499 | Min11.0 | Min7.0 | Min10 |
0.500-1.000 | Min10.0 | Min5.0 | Min20 | |
1.001-3.000 | Min9.0 | Min4.0 | Min25 |
Thickness: 0.2mm -6mm
Width: 30 mm-2600 mm
Length: as customer required
Temper: O /H12/H14/H16/H18/H26/H22/H24/H26/H28
Chemical Composition of 1060 Aluminium Sheet
Elements | Si | Fe | Cu | Mn | Mg | Cr | Zn | Ti | Others | Al |
Content (max ) | 0.25
| 0.35 | 0.05 | 0.03 | 0.03 | - | 0.05 | 0.03 | 0.15 | Remain |
Mechanical Properties of 1060 Aluminum Sheet
Alloy Temper | Specified | Tensile | Yield | Elongation(%) |
Thickness(in.) | strength(ksi) | strength(ksi) | ||
1060-O(annealed) | 0.006-0.019 | 8.0-14.0 | 2.5 | Min15 |
0.020-0.050 | Min22 | |||
0.051-3.000 | Min25 | |||
1060-H12/1060-H22 | 0.017-0.050 | 11.0-16.0 | 9 | Min6 |
0.051-2.000 | Min12 | |||
1060-H14/1060-H24 | 0.006-0.019 | 12.0-17.0 | 10 | Min1 |
0.020-0.050 | Min5 | |||
0.051-1.000 | Min10 | |||
1060-H16/1060-H26 | 0.006-0.019 | 14.0-19.0 | 11 | Min1 |
0.020-0.050 | Min4 | |||
0.051-0.162 | Min5 | |||
1060-H18/1060-H28 | 0.006-0.019 | Min16.0 | Min12.0 | Min1 |
0.020-0.050 | Min3 | |||
0.051-0.128 | Min4 | |||
1060-H112 | 0.250-0.499 | Min11.0 | Min7.0 | Min10 |
0.500-1.000 | Min10.0 | Min5.0 | Min20 | |
1.001-3.000 | Min9.0 | Min4.0 | Min25 |
